Chiamaci al: +39 059 8751076
Email: info@automation-shop.com
My Cart
0
0
prodotti:
0,00 €
Ci sono 0 item(s) nel tuo carrello
Nessun prodotto nel carrello
Totale :
€ 0.00
Cart
Quantità
Totale
Prodotto aggiunto con successo al carrello
Ci sono 0 prodotti nel tuo carrello
C'è un prodotto nel tuo carrello
Totale
(Iva excl.)
 "POE-24-48")
POE-24-48 - UBIQUITI
POE-24-48 Alimentatore POE 48V 0.5A 24W
42,00 € IVA Esclusa
Standard - Nuovo
Disponibile
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.
Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.
Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m).
Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.
Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m).
Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
In case if the destination device does not support PoE-in powering, the PoE Passthrough can be disabled by manually removing all jumpers.
Datasheet 10004813 |
Documentazione (1.89M) |
Prodotti suggeriti
-
GPeR
42,00 €