Chiamaci al: +39 059 8751076
Email: info@automation-shop.com
My Cart
0
0
prodotti:
0,00 €
Ci sono 0 item(s) nel tuo carrello
Nessun prodotto nel carrello
Totale :
€ 0.00
Cart
Quantità
Totale
Prodotto aggiunto con successo al carrello
Ci sono 0 prodotti nel tuo carrello
C'è un prodotto nel tuo carrello
Totale
(Iva excl.)
 "EM1000-1024K-02")
EM1000-1024K-02 - TIBBO
EM1000 module with 1024KBytes of flash memory Hardware revision "-02
43,00 € IVA Esclusa
Standard - Nuovo
In Riassortimento
Se non a stock, tempo di consegna: 2 settimane
The EM1000 is a full-featured Tibbo BASIC/C-programmable IoT Module with Ethernet, as well as optional Wi-Fi* and 4G/LTE cellular** connectivity. The EM1000 has four UARTs.
The device\'s capabilities are further enhanced by the onboard flash memory hosting a hardened fault-tolerant file system, as well as the EEPROM and RTC. The RTC backup supercapacitor can be installed on the module ("-S" ordering option) or connected externally.
The EM1000 has 54 general-purpose I/O lines and can control an externally attached LCD, keypad, buzzer, card readers, serial devices, and other circuitry.
Device pins have the standard 2.54mm (100mil) pitch. This makes the module ideal for use not only in production devices but also for prototyping.
Module testing and evaluation can be performed with our EM1000EV kit. The EM1001 board, a close relative of the EM1000, is also a very convenient testing option.
The device\'s capabilities are further enhanced by the onboard flash memory hosting a hardened fault-tolerant file system, as well as the EEPROM and RTC. The RTC backup supercapacitor can be installed on the module ("-S" ordering option) or connected externally.
The EM1000 has 54 general-purpose I/O lines and can control an externally attached LCD, keypad, buzzer, card readers, serial devices, and other circuitry.
Device pins have the standard 2.54mm (100mil) pitch. This makes the module ideal for use not only in production devices but also for prototyping.
Module testing and evaluation can be performed with our EM1000EV kit. The EM1001 board, a close relative of the EM1000, is also a very convenient testing option.
Datasheet 10005355 |
Documentazione (316.19k) |
